Bottom Guide - ECO AL Profile 90x99mm

ECO Bottom Guide Set for Cantilever Sliding Gates, AL Profile 90 × 99 mm

Product Code: SV-90x99-AL-ECO

The SV-90x99-AL-ECO bottom guide set provides a complete solution for the support and guide mechanism of cantilever sliding gates with an aluminum guide profile of 90 × 99 mm. It ensures stable support for the gate leaf, its precise guidance, and smooth movement during opening and closing without the need for a bottom rail in the passage.

The assembly includes two support carriages with nylon wheels, an end wheel, a bottom receiver, covers, end stops, and the necessary fastening material. The system also allows for direct mechanical connection of the carriage to the drive via a shaft coupling. The combination of steel, stainless steel, and nylon components provides a functional solution for manufacturing new cantilever sliding gates and modernizing existing gate systems.

Material

Stainless steel AISI 304, steel, and nylon. Individual components are made from materials corresponding to their function in the support and guide mechanism.

Surface Finish

Zinc and natural finish of stainless steel components. The zinc surface treatment of steel parts helps protect their surface from corrosion. Stainless steel components made of AISI 304 provide good weather resistance, and nylon wheels contribute to the smooth movement of the gate.

Dimensions and Technical Parameters

– Product Type: ECO bottom guide set

– Application: cantilever sliding gates

– Guide profile dimension series: 90 × 99 mm

– Compatible profile: aluminum guide profile AL 90 × 99 mm

– Material: stainless steel AISI 304, steel, nylon

– Surface finish of steel parts: zinc

– Number of support carriages: 2 pcs

– Wheel type: nylon

– Possibility of connection to drive: via compatible shaft coupling

– Mounting method: mechanical fastening and installation into gate system

Assembly Contents

– Support carriages Zn + NYLON for profile 90 × 99 mm: 2 pcs

– End wheel without cover for profile 90 × 99 mm: 1 pc

– Bottom receiver INOX for profile 90 × 99 mm: 1 pc

– Profile cover INOX for profile 90 × 99 mm: 2 pcs

– Stainless steel TORX screw with cylindrical head: 8 pcs

– End stop AISI 304: 2 pcs

– Stainless steel screw M6 × 12 with internal hexagon: 4 pcs

– Stainless steel hexagonal nut M6: 4 pcs

– Stainless steel flat washer M6: 4 pcs

Mounting and Compatibility

The set is designed for use with an aluminum guide profile AL 90 × 99 mm, which forms the supporting part of the cantilever sliding gate leaf. The two support carriages are fastened to a suitably prepared support base and ensure the guidance of the profile during gate movement.

The end wheel, bottom receiver, and end stops serve to correctly guide, seat, and stop the gate leaf in the desired position. During installation, it is necessary to ensure precise alignment of the carriages, the correct position of the guide profile, and sufficient strength of the supporting structure.

The system also allows for direct mechanical connection of the compatible support carriage to the drive unit using a shaft coupling. This solution enables the transfer of torque from the drive to the carriage and represents an alternative method for implementing the drive of a cantilever sliding gate. During installation, it is necessary to ensure proper shaft connection and verify the dimensional and mechanical compatibility of the coupling with the used carriage and drive.

The aluminum guide profile is not part of the set and is ordered separately. The compatible AL 90 × 99 mm profile is available in lengths of 6,000 mm and 7,000 mm. The shaft coupling is not listed among the components of the set.

When designing the gate, it is necessary to consider its total weight, dimensions, the length of the guide profile, and the mounting conditions. The load capacity of the set must be verified according to the manufacturer's technical data.

Advantages

– Complete set of bottom guide components for cantilever sliding gates.

– Two support carriages with nylon wheels for smooth movement of the gate leaf.

– Compatibility with aluminum guide profile AL 90 × 99 mm.

– Possibility of direct mechanical connection of the carriage to the drive using a shaft coupling.

– Alternative solution for power transmission to the support carriage.

– Combination of steel, stainless steel, and nylon components.

– Zinc surface treatment of steel parts for corrosion protection.

– Stainless steel additional components made of AISI 304.

– End wheel and bottom receiver for correct gate guidance.

– End stops for mechanical movement limitation.

– Fastening material included in the set.

– Suitable for manufacturing new cantilever sliding gates and modernizing existing systems.